Service Areas › San Diego
San Diego the city is not one housing market, it is thirty of them stacked inside one boundary. A 1926 bungalow in South Park and a 2019 condo in East Village can both need a shower door this month, and they need two completely different panels measured two completely different ways.
The inner neighborhoods are the tricky ones. North Park, South Park, Golden Hill, Normal Heights, and University Heights are packed with 1910s to 1940s bungalows where the bathroom was carved out of a closet and nothing about the opening is square. Walls bow, floors slope toward the drain, and the header above the shower is often a structural beam rather than a framed soffit, which changes how a sliding rail has to be anchored. Clairemont and Serra Mesa add a 1950s tract layer with small three-quarter baths that were never designed for a 36 inch door.
City of San Diego water runs hard, roughly 200 to 300 parts per million depending on which treatment plant served your district that week. Uncoated glass in a city bathroom etches visibly inside two years, and the spots at the hinge line become permanent pitting rather than something a squeegee fixes.
A closet-sized 1930s bath usually needs a custom neo-angle because no stock door fits an opening 31 inches wide with an out-of-plumb return wall.
Downtown and Mission Valley towers require COI paperwork, elevator reservations, and glass that fits a service elevator or a freight car before it fits the bathroom.
Clairemont and Mira Mesa builder bypass doors are at end of life, and the top rail is usually screwed into drywall rather than blocking, so the new door needs backing added first.
North Park, South Park, Hillcrest, Mission Hills, Kensington, University Heights, Normal Heights, Clairemont, Mira Mesa, Rancho Penasquitos, Carmel Valley, Tierrasanta, Serra Mesa, Golden Hill. ZIP codes served include 92104, 92103, 92107, 92109, 92117, 92126.
Inside the city there is a wrinkle most glass companies ignore: a permit is often required for a full enclosure replacement on a multi-family building, and HOA architectural review adds a week for anything visible from a common area. We tell you which one applies before you sign.
For a like-for-like glass swap on a single-family home, no. If we are changing the enclosure configuration, adding a steam unit, or working in a multi-family building where the association requires it, a permit or HOA approval is usually needed and we will tell you up front.
Yes, and we do it regularly. We carry the certificate of insurance the building will ask for, book the freight elevator, and protect the unit's floors and door frames during the carry.
Hard enough to matter. We recommend a factory-applied hydrophobic coating on every install inside the city limits, because once hard-water etching sets into uncoated glass, polishing will not bring it back.
Serving San Diego and all of San Diego County. Templated on site, quoted in writing.
Free — no obligations